IR Pre Gel Oven Case Study

​​Gas Catalytic IR Pre-Gel Oven

Pre Gel Oven Case Study | Reduced Energy Costs | Improved Quality

We now have a highly efficient, high quality paint finishing process. From the start to finish of the project Junair Spraybooths Ltd. did a great job. In particular, using Vulcan Catalytic Systems (now Heraeus Vulcan), for the design and supply of the Gas Catalytic IR oven components has proven to be a great decision. The improvement in finished product quality and reduced operating costs has exceeded our expectations.”

Ryan Davis (Production Manager, GEA Heat Exchangers - GEA Searle Systems)

https://catalyticovens.com/heraeus-assists-metsa-improve-output-quality-reduce-operating-costs

When the Going Gets Tough......

Pre Gel Oven Case Study. When Ryan Davis (Production Manager at GEA Heat Exchangers - GEA Searle Systems) went home one evening a couple of years ago, after a normal busy day, he was pleased to put his feet up. Little did he know that, overnight, an unforeseen event would occur that would ultimately lead to the installation of a brand new powder coating system that he didn’t know he needed.

Ryan works for GEA Heat Exchangers - GEA Searle Systems, a global company that manufactures heat exchangers. The Fareham facility produces air conditioning and refrigeration units for industrial and commercial customers worldwide. The company has a well earned reputation for quality products, delivered on time, in a very competitive market. The company is a World Class manufacturer, which is undoubtedly due in part to the adoption of Lean Manufacturing techniques in 2010.

The unforeseen event?

The manufacturing plant in Fareham, Hampshire suffered a fire that destroyed 40% of the site. The sudden complete loss of their painting and powder coating plant was potentially catastrophic, but in true British Bulldog spirit, the whole team rallied together and put together a plan to ensure that the inevitable disruption was kept to a minimum. Local sub contract powder coaters stepped up to the plate and helped to keep production flowing until GEA Heat Exchangers - GEA Searle Systems could restore the manufacturing capability at the plant.

One of the first things that Ryan did was to call Angus Trenholme of Junair Spraybooths Ltd., GEA Heat Exchangers - GEA Searle Systems had successfully worked with Angus on many previous painting and powder coating projects, so it did not take long for a specification to be put together, quoted and ordered.

Gas Catalytic IR Pre Gel Oven - Part Of The Solution

Being a Lean Manufacturing company, GEA Heat Exchangers - GEA Searle Systems took this opportunity to update their powder coating capability; the shortlist of requirements was straight forward:

  • Minimum 6,000 parts  per week (mainly galvanized panels, 200⁰C cure polyester powder)
  • Improved quality
  • Reduced operating costs
  • Smaller footprint
  • 1.6 m/min track speed with potential to increase to 2 m/min and eventually 3 m/min
  • Reduced maintenance

A tall order!  Angus, contacted Vulcan Catalytic Systems (now Heraeus Vulcan), and asked us to design a suitable Pre Gel oven for the new powder coating system. The main purpose of the Pre Gel oven is to reduce the overall cure time by raising the powder temperature up to 200⁰C very quickly, so the powder flows and starts the curing process. Whilst we designed the oven and supplied the IR technology, Junair pulled together the rest of the project which involved new Pre Treatment plant, drying oven and powder application equipment. 

The Gas Catalytic Pre-Gel oven that we designed consists of two sections, with 10 individual heaters and three separately controllable zones in each section. The fully reflected design ensures maximum efficiency and the PLC controls are configured to optimize energy savings by automatically dropping into the energy saving  “Low Fire” mode when there are breaks in production.

Gas Catalytic IR Pre Gel ovens from Heraeus Vulcan offer a proven, flexible solution that can enhance any conventional convection oven ​. The main advantages are:

  • Increased line speed
  • Increased capacity and productivity
  • Reduced footprint
  • Reduced cross contamination of powder

The final system has now been up and running since December 2014. Ryan reports that he is very pleased with how it is working. Already significant improvements are being recorded, especially in energy consumption. The improvement in quality has been proven by the results of controlled Salt Spray tests, which will mean fewer warranty claims and a reduction in the Total Cost of Quality.